TL16C550CPTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | MOS |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 14.9MHz |
| Base Part Number | TL16C550 |
| Pin Count | 48 |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Memory Size | 16B |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C550CPTG4 Overview
UART is available in the cost-effective 48-LQFP package.The transmission of data takes place over 1, UART channels.In terms of packaging, Tray is adopted.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.In its configuration, 48 terminations are used.During operation, it receives a voltage of 5V.The current status of this electronic part is Active.Data communication is handled by 1 serial I/Os.Mounting is done through Surface Mount.There is 3V~5.25V supply voltage for it.In this case, the electronic device is a type of integrated circuit with 48 pins.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.To ensure long-term operation, the operating temperature should not exceed -40°C.To ensure long-term operation, the operating temperature should not exceed 85°C.The configuration of this device is based on the 48 pins.The device is mounted in accordance with Surface Mount.If the power supply is set to 3.3/5V, it is reliable and efficient for electronic designers.The base part number of the part is set to TL16C550.There is a maximum value for supply current that is 8mA.A supply current of 10mA is appropriate for specific applications.A memory with a size of 16B contains various information.
TL16C550CPTG4 Features
1 serial I/Os
Power supplies of 3.3/5V
TL16C550CPTG4 Applications
There are a lot of Texas Instruments TL16C550CPTG4 UARTs applications.
- Serial to Parallel/Parallel to Serial Converter
- Factory automation and process control
- Personal Digital Assistants Modules
- Personal Digital Assistants
- Multi-port RS-232/RS-422/RS-485 Cards
- Network Management
- Handheld Terminals and Tablets
- Industrial computing
- Ethernet Network Routers
- Gaming Terminals
