TL16C550DIPT
| Parameters | |
|---|---|
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| Memory Size | 16B |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C550 |
TL16C550DIPT Overview
In order to make it more cost-effective, this product is also available in a package of 48-LQFP.There are 1, UART channels used for transmission.In terms of packaging, Tray is adopted.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.As part of its configuration, it uses 48 terminations.To operate it, 5V is provided as the supply voltage.At present, this electronic part has a status of Active.Data is communicated via 1 serial I/Os.You can mount it by using Surface Mount.UART operates on a voltage of 2.25V~5.5V.This electronic device is a type of 48-pin IC.IC clock frequency is set to 24MHz.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above 85°C.Initially, it will be configured with 48 pins.The way of mounting it is Surface Mount.In order to achieve high efficiency, it is provided with the supply voltage of 5V.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 2.5V/3.3V SUPPLY.As a base part number, it is specified as TL16C550.The supply current of 8mA is an allowable maximum value.A supply current of 10mA is appropriate for specific applications.There is a lot of information stored in the memory with the size 16B.
TL16C550DIPT Features
1 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 2.5V/3.3V SUPPLY
TL16C550DIPT Applications
There are a lot of Texas Instruments TL16C550DIPT UARTs applications.
- Domestic Applications
- Portable and battery operated devices
- Cellular Phones DataPort
- Ethernet Network Routers
- Communications equipment
- Gaming Terminals
- Point-of-Sale Systems
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Telecommunication Network Routers
- Multimedia Systems
