TL16C550DPTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C550 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Memory Size | 16B |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C550DPTG4 Overview
In addition, it is available in the cost-effective package 48-LQFP.The transmission is conducted over 1, UART channels.Packaging is based on Tray.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.Configuration of this device involves 48 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Active.In order to communicate data, there are 1 serial I/Os.Mounting is possible through Surface Mount.UART operates on a voltage of 2.25V~5.5V.Electronic devices such as this are known as 48-pin integrated circuits.24MHz is the clock frequency of this integrated circuit.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.The operating temperature should not exceed -40°C to ensure normal work for a long time.The operating temperature should be in excess of 85°C to ensure the normal work for a long time.A configuration of the chip is determined by its 48 pins.Using Surface Mount, it is mounted.Its high-efficiency operation depends on a supply voltage of 5V.Additionally, it can perform ALSO OPERATES AT 2.5V/3.3V SUPPLY.In order to identify this part, its base part number is TL16C550.There is a maximum value for supply current that is 8mA.Universal asynchronous receiver-transmitter operates wUniversal asynchronous receiver-transmitterh the supply current of 10mA, which is suUniversal asynchronous receiver-transmitterable for specific application.This memory contains a variety of information with a size of 16B.
TL16C550DPTG4 Features
1 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 2.5V/3.3V SUPPLY
TL16C550DPTG4 Applications
There are a lot of Texas Instruments TL16C550DPTG4 UARTs applications.
- Ethernet Network to Serial Ports
- Portable Appliances
- Handheld Computers
- Serial to Parallel/Parallel to Serial Converter
- Cellular Phones DataPort
- Network Management
- Multi-port RS-232/RS-422/RS-485 Cards
- Factory Automation and Process Controls
- Communications equipment
- Cellular Data
