TL16C552FNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Printer Port |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | MOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C552 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 8 |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | IBM PC-AT |
| Data Transfer Rate-Max | 0.0625 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C552FNR Overview
UART is available in the cost-effective 68-LCC (J-Lead) package.The transmission is conducted over 2, DUART channels.In terms of packaging, Tape & Reel (TR) is adopted.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.There are 68 terminations used in its configuration.The supply voltage of 5V is provided for its operation.At present, this electronic part is in the state of Active.Data is communicated via 2 serial I/Os.A method of mounting it is through Surface Mount.UART operates on a voltage of 4.75V~5.25V.This device is an integrated circuit with 68 pins.8MHz is the clock frequency of this integrated circuit.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.UART is important that the operating temperature does not exceed 0°C in order for the machine to perform normally for a long time.The operating temperature should be in excess of 70°C to ensure the normal work for a long time.A configuration of the chip is determined by its 68 pins.Several characteristics of Printer Port are present in it.Surface Mount is the method used to mount it.UART is reliable and efficient for electronic designers to use when power supplies of 5V are provided.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.TL16C552 is set as the base part number for the part.50mA is the maximum value allowable for supply current.Data can be transferred through 8 I/Os.
TL16C552FNR Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 5V
Operating supply voltage of 5V
8 I/Os
TL16C552FNR Applications
There are a lot of Texas Instruments TL16C552FNR UARTs applications.
- Portable Appliances
- Point-of-Sale Systems
- Remote Access Servers
- Router C ontrol
- Factory Automation and Process Controls
- Domestic Applications
- Serial to Parallel/Parallel to Serial Converter
- Battery Operated Instruments
- Ethernet Network Routers
- Factory automation and process control
