TL16C554APNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C554 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Memory Size | 16B |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C554APNG4 Overview
In order to make it more cost-effective, this product is also available in a package of 80-LQFP.UART is possible to transmUART on 4, QUART channels.In terms of packaging, Tray is adopted.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.In order to configure this device, 80 terminations are used.UART operates on 3.3V supply voltage.The current status of this electronic part is Active.In order to communicate data, there are 4 serial I/Os.Surface Mount is a way to mount it.3V~5.25V supply voltage is required to operate it.This device is an integrated circuit with 80 pins.Its clock frequency is measured at 16MHz.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.To maintain normal work for a long time, the operating temperature should not exceed -40°C.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 85°C.The configuration relies on the 80 pins.Surface Mount is the method used to mount it.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.Basically, it uses TL16C554 as its base part number.50mA is the maximum value of the supply current.A supply current of 50mA is appropriate for specific applications.With a size of 16B, the memory store various types of information.
TL16C554APNG4 Features
4 serial I/Os
Clock frequency of 16MHz
Operating supply voltage of 5V
TL16C554APNG4 Applications
There are a lot of Texas Instruments TL16C554APNG4 UARTs applications.
- Portable and battery operated devices
- White goods
- Portable Applications
- Wireless Infrared Data Communications Systems
- Handheld Terminal
- Cellular Data
- Handheld Terminals and Tablets
- Serial to Parallel/Parallel to Serial Converter
- Domestic Applications
- Multi-port RS-232/RS-422/RS-485 Cards
