TL16C554FN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Voltage - Rated DC | 5V |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 8MHz |
| Base Part Number | TL16C554 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Number of Circuits | 4 |
| Memory Size | 16B |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Propagation Delay | 50 ns |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C554FN Overview
UART is available in the cost-effective 68-LCC (J-Lead) package.The transmission of data takes place over 4, QUART channels.Tube is adopted as the packaging option.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.68 terminations are used as parts of its configuration.The supply voltage of 5V is provided for its operation.This electronic part is Active at present.As a means of communicating data, there are 4 serial I/Os available.Mounting is done through Surface Mount.This device operates with a supply voltage of 4.75V~5.25V.This device is an integrated circuit with 68 pins.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.The operating temperature should not exceed -40°C to ensure normal work for a long time.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.A configuration of the chip is determined by its 68 pins.Using Surface Mount, it is mounted.If the power supply is set to 5V, it is reliable and efficient for electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.There is a default setting for the base part number of the part to be TL16C554.50mA is an allowable maximum supply current.With a supply current of 50mA, it is suitable for a variety of applications.This memory contains a variety of information with a size of 16B.
TL16C554FN Features
4 serial I/Os
Power supplies of 5V
Operating supply voltage of 5V
TL16C554FN Applications
There are a lot of Texas Instruments TL16C554FN UARTs applications.
- Handheld Terminals and Tablets
- Portable and battery operated devices
- Infrared Transceivers
- Router C ontrol
- Factory Automation
- Universal PCI Bus Add-in Card
- Domestic Applications
- Wireless Portable Point-of-Sale Terminals
- Ethernet Network Routers
- Cellular data devices
