TL16C554PNR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C554 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
TL16C554PNR Overview
The 80-LQFP package is the most cost-effective.Transmission is done through 4, QUART channels.As far as packaging is concerned, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.A configuration of 80 terminations is used.In order to operate it, a supply voltage of 5V is required.Currently, this electronic part is Active.As a way to communicate data, the board has 4 serial I/Os.Mounting is done through Surface Mount.This device operates at 4.75V~5.25V.There are 80 pins on this electronic device.The clock frequency of this IC is measured at 16MHz.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The configuration of this device is based on the 80 pins.The mount is done using Surface Mount.With power supplies of 5V, electronic designers can use it reliably and efficiently.In order for the device to operate efficiently, 5V is the supply voltage.There is a default setting for the base part number of the part to be TL16C554.50mA is the maximum value allowable for supply current.
TL16C554PNR Features
4 serial I/Os
Clock frequency of 16MHz
Power supplies of 5V
Operating supply voltage of 5V
TL16C554PNR Applications
There are a lot of Texas Instruments TL16C554PNR UARTs applications.
- Point-of- Sale Terminals
- Cellular data devices
- Router C ontrol
- Portable Appliances
- Point-of-Sale Systems
- Industrial computing
- Wireless Portable Point-of-Sale Terminals
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Wireless Infrared Data Communications Systems
- Factory automation and process control
