TL16C752CIRHBR
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TL16C752 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
TL16C752CIRHBR Overview
There is a cost-effective 32-VFQFN Exposed Pad package available for this product.Transmission uses 2, DUART channels.Packaging is based on Tape & Reel (TR).The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.In order to configure this device, 32 terminations are used.To operate it, 5V is provided as the supply voltage.Currently, this electronic part is Active.Data is communicated via 2 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 1.62V~5.5V.An IC with 32 pins is what this device is.In this IC, the clock frequency is 48MHz.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.The operating temperature should not exceed 0°C to ensure normal work for a long time.UART is recommended that the operating temperature does not exceed 70°C to ensure long-term, normal performance.The configuration relies on the 32 pins.The mount is done using Surface Mount.In order for the device to operate efficiently, 5V is the supply voltage.Additionally, it is capable of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.Basically, it uses TL16C752 as its base part number.4.5mA is the maximum value of the supply current.
TL16C752CIRHBR Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C752CIRHBR Applications
There are a lot of Texas Instruments TL16C752CIRHBR UARTs applications.
- Handheld Terminal
- Cellular Data
- Ethernet Network Routers
- Universal PCI Bus Add-in Card
- Cellular Phones DataPort
- Telecommunication Network Routers
- Factory automation and process control
- Factory Automation and Process Controls
- Personal Digital Assistants Modules
- DTE for Modem Communication Systems
