TL16C752CIRHBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C752 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Address Bus Width | 3 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C752CIRHBRG4 Overview
The 32-VFQFN Exposed Pad package is the most cost-effective.There are 2, DUART channels used for transmission.Tape & Reel (TR) is adopted for packaging.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.As part of its configuration, it uses 32 terminations.During operation, it receives a voltage of 5V.In the present state, this electronic part is Active.Data communication is handled by 2 serial I/Os.Mounting is possible through Surface Mount.UART operates wUARTh the supply voltage of 1.62V~5.5V.An 32-pin integrated circuit is what this particular device is.There is a 48MHz clock frequency for this IC.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.Ideally, the operating temperature should not exceed 0°C in order to ensure long-term performance.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 70°C.As its configuration basis, the 32 pins are used.The way of mounting it is Surface Mount.Its high-efficiency operation relies on a voltage of 5V.Additionally, it can perform ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.TL16C752 is set as the base part number for the part.The supply current of 4.5mA is an allowable maximum value.
TL16C752CIRHBRG4 Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C752CIRHBRG4 Applications
There are a lot of Texas Instruments TL16C752CIRHBRG4 UARTs applications.
- Point-of- Sale Terminals
- Ethernet Network to Serial Ports
- Portable Applications
- Personal Digital Assistants Modules
- Multi-port RS-232/RS-422/RS-485 Cards
- Cellular data devices
- Network Management
- Portable Appliances
- Cellular Phones DataPort
- Ethernet Network Routers
