TL16C752CRHBRG4
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | VQFN EP |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.62V |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Data Rate | 3 Mbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
TL16C752CRHBRG4 Overview
The VQFN EP package is the most cost-effective.The transmission of data takes place over 2 channels.As for packaging, Tape & Reel (TR) is chosen.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.The configuration uses 32 terminations.The device operates at 5V voltage.As a way to communicate data, the board has 2 serial I/Os.An IC with 32 pins is what this device is.This IC measures its clock frequency at 48MHz.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.UART is important to keep the operating temperature below 0°C to ensure a long working period.Ideally, the operating temperature should not exceed 70°C in order to ensure long-term performance.The 32 pins are at the core of the device's configuration.The mounting method is Surface Mount.When the supply voltage is kept below 5.5V, reliability can be assured.When the supply voltage is kept above 1.62V, reliability can be ensured.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.The supply current of 4.5mA is an allowable maximum value.
TL16C752CRHBRG4 Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
TL16C752CRHBRG4 Applications
There are a lot of Texas Instruments TL16C752CRHBRG4 UARTs applications.
- Portable Applications
- Ethernet Network to Serial Ports
- Portable Appliances
- Cellular Phones DataPort
- DTE for Modem Communication Systems
- Remote Access Servers
- Multimedia Systems
- Battery Operated Instruments
- Personal Digital Assistants Modules
- Serial to Parallel/Parallel to Serial Converter
