TL16C754BFNG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C754 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Number of I/O | 8 |
| Nominal Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C754BFNG4 Overview
This product is available in a cost-effective package called 68-LCC (J-Lead).Transmission uses 4, QUART channels.In terms of packaging, Tube is used.Its uPs/uCs/Peripheral ICs type is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As part of its configuration, it uses 68 terminations.The supply voltage of 5V is provided for its operation.At present, this electronic part is in the state of Obsolete.Data is communicated via 4 serial I/Os.Surface Mount is a way to mount it.There is a voltage supply of 0 volts for the device.This device is an integrated circuit with 68 pins.In this IC, the clock frequency is 50MHz.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.UART is important to keep the operating temperature below -40°C to ensure a long working period.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 85°C.A configuration of the chip is determined by its 68 pins.Surface Mount is the method used to mount it.Its high-efficiency operation depends on a supply voltage of 5V.Furthermore, it has the ability to perform ALSO OPERATES AT 3.3V SUPPLY as well.Basically, it uses TL16C754 as its base part number.To transfer data, there are 8 I/Os.
TL16C754BFNG4 Features
4 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
8 I/Os
TL16C754BFNG4 Applications
There are a lot of Texas Instruments TL16C754BFNG4 UARTs applications.
- Industrial computing
- Personal Digital Assistants
- White goods
- Ethernet Network Routers
- DTE for Modem Communication Systems
- Wireless Infrared Data Communications Systems
- Telecommunication Network Routers
- Handheld Terminals and Tablets
- Wireless Portable Point-of-Sale Terminals
- Universal PCI Bus Add-in Card
