TL16C754BPNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C754 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C754BPNG4 Overview
UART is available in the cost-effective 80-LQFP package.Transmission is done through 4, QUART channels.Tray is used in terms of packaging.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.The configuration uses 80 terminations.UART operates on 5V supply voltage.Currently, this electronic part is Active.Data is communicated via 4 serial I/Os.Mounting is possible through Surface Mount.2.7V~5.5V supply voltage is required to operate it.UART is a type of 80-pin integrated circuUART.A frequency of 50MHz is measured for this IC.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.It is important to keep the operating temperature below 85°C to ensure a long working period.In its configuration, it is designed around the 80 pins.The device is mounted in accordance with Surface Mount.In order for the device to operate efficiently, 5V is the supply voltage.Furthermore, it is also capable of ALSO OPERATES AT 3.3V SUPPLY.The base part number of the part is set to TL16C754.
TL16C754BPNG4 Features
4 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
TL16C754BPNG4 Applications
There are a lot of Texas Instruments TL16C754BPNG4 UARTs applications.
- DTE for Modem Communication Systems
- Handheld Computers
- Telecommunication Network Routers
- Handheld Terminal
- Battery Operated Electronics
- Portable Applications
- Point-of- Sale Terminals
- Wireless Portable Point-of-Sale Terminals
- Personal Digital Assistants
- Ethernet Network Routers
