Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
80-LQFP |
Number of Pins |
80 |
Weight |
465.697616mg |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
80 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
ALSO OPERATES AT 3.3V SUPPLY |
HTS Code |
8542.39.00.01 |
Subcategory |
Serial IO/Communication Controllers |
Technology |
CMOS |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
TL16C754 |
Pin Count |
80 |
Operating Supply Voltage |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
4, QUART |
Number of I/O |
8 |
Nominal Supply Current |
50mA |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
50MHz |
Address Bus Width |
3 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Data Rate (Max) |
3Mbps |
Number of Serial I/Os |
4 |
Data Transfer Rate-Max |
0.375 MBps |
Communication Protocol |
ASYNC, BIT |
Data Encoding/Decoding Method |
NRZ |
FIFO's |
64 Byte |
With Modem Control |
Yes |
Height Seated (Max) |
1.6mm |
Length |
12mm |
Width |
12mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL16C754BPNRG4 Overview
Alternatively, UART can be purchased in the cost-effective 80-LQFP package.Transmission is carried out over 4, QUART channels.When UART comes to packaging, Tape & Reel (TR) is adopted as the packaging method.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.A configuration of 80 terminations is used.To operate it, 5V is provided as the supply voltage.Currently, this electronic part is Obsolete.As a means of communicating data, there are 4 serial I/Os available.The mount can be accessed via the Surface Mount method.UART operates on a voltage of 2.7V~5.5V.UART is a type of 80-pin integrated circuUART.This IC measures its clock frequency at 50MHz.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.The 80 pins form the basis for its configuration.The mount is done using Surface Mount.Its high-efficiency operation depends on a supply voltage of 5V.In addition, it has the capability of performing ALSO OPERATES AT 3.3V SUPPLY.Basically, it uses TL16C754 as its base part number.To transfer data, there are 8 I/Os.
TL16C754BPNRG4 Features
4 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
8 I/Os
TL16C754BPNRG4 Applications
There are a lot of Texas Instruments TL16C754BPNRG4 UARTs applications.
- Domestic Applications
- Factory Automation
- GPS Devices
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Infrared Transceivers
- Factory Automation and Process Controls
- White goods
- Cellular data devices
- Ethernet Network Routers
- Personal Digital Assistants Modules