TL16CP754CIPMRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP754 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 28mA |
| Max Supply Current | 28mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP754CIPMRG4 Overview
This product is available in a cost-effective package called 64-LQFP.UART is possible to transmUART on 4, QUART channels.When UART comes to packaging, Tape & Reel (TR) is adopted as the packaging method.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.The configuration uses 64 terminations.During operation, it receives a voltage of 5V.The status of this electronic part is currently Active.Data communication is handled by 4 serial I/Os.The mount can be accessed via the Surface Mount method.This device operates at 1.62V~5.5V.There are 64 pins on this electronic device.This IC measures its clock frequency at 48MHz.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of -40°C.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.The 64 pins form the basis for its configuration.Several characteristics of Internal Oscillator can be observed in it.A mounting method of Surface Mount is used.When power supplies are provided of 1.8/5V, it is reliable and efficient for electronic designers.To ensure its high efficiency, a voltage of 1.8V is provided as the supply voltage.In addition, it has the capability of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.This part has a base part number of TL16CP754.28mA is the maximum allowable supply current.
TL16CP754CIPMRG4 Features
4 serial I/Os
Clock frequency of 48MHz
Power supplies of 1.8/5V
Operating supply voltage of 1.8V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16CP754CIPMRG4 Applications
There are a lot of Texas Instruments TL16CP754CIPMRG4 UARTs applications.
- Handheld Computers
- Router C ontrol
- Cellular Data
- Domestic Applications
- Point-of-Sale Systems
- Multimedia Systems
- Ethernet Network to Serial Ports
- Portable Applications
- Factory Automation and Process Controls
- Point-of- Sale Terminals
