TL2575-ADJIKTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 1.591202g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | TL2575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Output Voltage | 37V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4.75V |
| Input Voltage-Nom | 12V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 37V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.23V |
| Voltage - Output (Max) | 37V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2575-ADJIKTTR Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, 5 terminations are present. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. There is a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. This DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mount switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. This voltage regulator 12v reaches a switching frequency of 52kHz. Regulator 4.75V can operate with dc to dc voltage regulator's minimum input voltage 4.75V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. An input voltage of 12V is required to meet the requirements of the switching regulator operation. The TL2575 family of DC/DC regulators includes this DC/DC regulator. At 37V volts, voltage regulator can provide voltage. There are 5 pins used for switching regulator operation. This voltage regulator 12v should be configured with an output voltage that is at least 1.23V. A maximum output current of 1A A is available to meet the switching regulator operation requirements. On the basis of 37V's maximal output voltage, DC DC switching regulator can be operated easily. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 37V. DC-DC switching regulator with 40V supply voltage. Voltage regulator consumes 5mA A of quiescent current without being affected by outside forces. In this case, a dc to dc voltage regulator's minimum supply voltage of 4.75V volts is required to ensure reliable performance.
TL2575-ADJIKTTR Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 40V
TL2575-ADJIKTTR Applications
There are a lot of Texas Instruments TL2575-ADJIKTTR Voltage Regulators applications.
- Serial communication converter
- Hydraulic presses
- Correction machines
- Adjustable voltage or current linear circuits
- Industrial controllers
- Solar power plants
- Wind power
- Grinders
- Household control circuits
- Computed tomography (CT)
