TL2842P
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | TL2842 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Quiescent Current | 11mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 97% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
TL2842P Overview
The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 10V~30V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. Switching can be done at Up to 500kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Through Hole. Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Search for "TL2842" to find other relevant dc to dc converter ics. Total pins of switching converter are 8. Switching converter type is specifically Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 30V. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. Switching controller operates at a frequency of 500kHz. In a dormant state, the dc switching uses 11mA. You can set the input voltage to 5.5V for nominal working status. Voltage 15V must be supplied. 30mA more than 30mA current should be supplied to the controller.
TL2842P Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
TL2842P Applications
There are a lot of Texas Instruments TL2842P DC to DC converter applications.
- Serial communication converter
- Program control systems
- Correction machines
- Series voltage regulation circuits
- Medical equipment
- Pipe bending machines
- Surge protection circuits
- Printing
- Wide-range voltage regulation circuits
- Refrigerators of central air conditioners
