TL2843BDRG4-8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2843 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2843BDRG4-8 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 7.6V~30V. Worked in a -40°C~85°C TA dc switcher before. A switching controller such as this can switch at a value of Up to 500kHz . The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "TL2843". Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 30V voltage based on test statistics. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. A frequency of 500kHz is used by the switching controller. You can set the input voltage to 5.5V for nominal working status. Voltage 15V must be supplied. It is not recommended to supply more current to the controller than 30mA.
TL2843BDRG4-8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
TL2843BDRG4-8 Applications
There are a lot of Texas Instruments TL2843BDRG4-8 DC to DC converter applications.
- Radio equipment
- Driver circuits
- Computer-related products
- Ball screw pair
- Computer application technology
- Grinders
- Computer monitoring equipment of building
- Overvoltage protection circuits in TV sets
- Injection molding machinery
- Domestic water pumps
