TL2843DR-8

8 Terminals 7.6V~30V 8-Pin TL2843 DC to DC converter ICSWITCHING REGULATOR 1 Outputs Up to 500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL2843DR-8
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 632
Description: 8 Terminals 7.6V~30V 8-Pin TL2843 DC to DC converter ICSWITCHING REGULATOR 1 Outputs Up to 500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	500kHz
Base Part Number	TL2843
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	30V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING REGULATOR
Operating Supply Current	11mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7.6V~30V
Quiescent Current	11mA
Control Features	Frequency Control
Topology	Boost, Flyback, Forward
Control Mode	CURRENT-MODE
Frequency - Switching	Up to 500kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	50ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	50 ns
Nominal Input Voltage	5.5V
Max Duty Cycle	100 %
Duty Cycle (Max)	97%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL2843DR-8 Overview

The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Cut Tape (CT) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.6V~30V. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at Up to 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "TL2843". The switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 30V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. A frequency of 500kHz is used by the switching controller. A dc switching in a dormant state uses 11mA. You can set the input voltage to 5.5V for nominal working status. Voltage 15V is required for supply. You should not supply more current than 30mA to the controller. With a current supply of 11mA, it runs.