TL2844BD-8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2844 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2844BD-8 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 10V~30V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at Up to 500kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "TL2844". The switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, the DC regulator outputs 30V voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. 500kHz is the frequency of the switching controller. Input voltage can be set to 5.5V for nominal working status. Switching controller is necessary to provide a voltage of 15V. Current supplied to the controller should not exceed 30mA.
TL2844BD-8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL2844BD-8 Applications
There are a lot of Texas Instruments TL2844BD-8 DC to DC converter applications.
- Large fire protection systems
- Milling machines
- seismic instrument power circuits
- Medical equipment
- Analog precision reference circuits
- Various precision measuring detectors
- Emergency lighting monitoring equipment
- Electrical power transmission
- Wide-range voltage regulation circuits
- Computer-related products
