TL2844BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2844 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2844BDR Overview
This switching controller fits most application requirements since it is packaged in a 14-SOIC (0.154, 3.90mm Width) package. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 10V~30V and has a 10V~30V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller is capable of switching at the Up to 500kHz position. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 14 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 15V. Other relevant dc to dc converter ics will be returned if you search "TL2844". 14 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 30V voltage based on test statistics. If you start a project, note down the dc dc regulator's usual output current of 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controllers operate at 500kHz frequencies. For nominal working status, the input voltage can be set as 5.5V. Voltage 15V is required for supply. It is important that the controller is supplied with 30mA more than 30mA volts of current.
TL2844BDR Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL2844BDR Applications
There are a lot of Texas Instruments TL2844BDR DC to DC converter applications.
- CNC system
- Overvoltage protection circuits in TV sets
- Grinders
- Hydrogen power
- CMM
- Magnetohydrodynamic power
- Digital display device
- Automatic testing equipment
- Post equipment
- Serial communication converter
