TL2844BDRG4-8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2844 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2844BDRG4-8 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 10V~30V. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at Up to 500kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. 8 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "TL2844". Pins number 8 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 30V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Switching controller operates at 500kHz Hz. Input voltage can be set to 5.5V for nominal working status. Voltage 15V must be supplied. The controller should not be supplied with more current than 30mA.
TL2844BDRG4-8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL2844BDRG4-8 Applications
There are a lot of Texas Instruments TL2844BDRG4-8 DC to DC converter applications.
- Flaw detection equipment
- Radio equipment
- CMM
- Computer monitoring equipment of building
- Production lines
- Sensitive electronic devices
- SMT equipment
- Constant current circuits
- Serial communication converter
- Imported equipment
