TL2845BDRG4-8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2845BDRG4-8 Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. 7.6V~30V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at Up to 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 8 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 15V. Searching "TL2845" will return other relevant dc to dc converter ics. Total pins of switching converter are 8. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 30V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. There is 500kHz frequency setting on the switching controller. Input voltage can be set to 5.5V for nominal working status. Voltage 15V is required for supply. There should be 30mA more than 30mA amps of current supplied to the controller.
TL2845BDRG4-8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
TL2845BDRG4-8 Applications
There are a lot of Texas Instruments TL2845BDRG4-8 DC to DC converter applications.
- Lathes
- Game consoles
- Industrial robots
- Hydrogen power
- Wind power
- Direct power supply system
- Mobile phones
- Correction machines
- Refrigerators of central air conditioners
- Large fire protection systems
