TL2845BP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | TL2845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 48 % |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2845BP Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 7.6V~30V. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at Up to 500kHz. A generalization of dc dc regulator can be made using Through Hole. Switching control is made easier with the dcdc regulator's Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. In addition to "TL2845", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 30V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 200mA. voltage regulator dc to dcs with a 48 % duty cycle are designed to be reliable when powered on and powered off. A frequency of 500kHz is set for the switching controller. A nominal working status is achieved when the input voltage is set to 5.5V.
TL2845BP Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 500kHz
TL2845BP Applications
There are a lot of Texas Instruments TL2845BP DC to DC converter applications.
- Hydro power
- Photovoltaic power
- Smart grid
- CMM
- Die casting equipment
- Thermal power
- Ball screw pair
- Access control systems
- PSRR circuits
- Wind power
