TL2845DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 500kHz |
| Base Part Number | TL2845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5.5V |
| Max Duty Cycle | 48 % |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL2845DRG4 Overview
As a result of 14-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 7.6V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the Up to 500kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. SWITCHING REGULATOR analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 14 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 15V. In addition to "TL2845", there are other relevant dc to dc converter ics you can find. 14 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 30V voltage according to the test statistics. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 48 %. Switching controllers operate at 500kHz frequencies. 5.5V is the nominal working voltage. A supply voltage of 15V is required. It is important that the controller is supplied with 30mA more than 30mA volts of current.
TL2845DRG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 500kHz
TL2845DRG4 Applications
There are a lot of Texas Instruments TL2845DRG4 DC to DC converter applications.
- Hydraulic presses
- Geothermal power
- Driver circuits
- Window air conditioners
- Flaw detection equipment
- Electric water heaters
- Telecommunications equipment
- Fire elevators
- PSRR circuits
- Pipe bending machines
