banner_page

TL288CP

2 Channels 80mA per Channel 30pA 80 dB Instrumentational OP Amps 0.007μA 15V ±5V~15V TL288 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL288CP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 700
  • Description: 2 Channels 80mA per Channel 30pA 80 dB Instrumentational OP Amps 0.007μA 15V ±5V~15V TL288 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 2
Supply Voltage 15V
Base Part Number TL288
Pin Count 8
Operating Supply Voltage 15V
Number of Channels 2
Operating Supply Current 2.6mA
Nominal Supply Current 5.6mA
Slew Rate 18V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 80 dB
Current - Input Bias 30pA
Voltage - Supply, Single/Dual (±) ±5V~15V
Output Current per Channel 80mA
Input Offset Voltage (Vos) 100μV
Bandwidth 3MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3000 kHz
Voltage Gain 100.42dB
Average Bias Current-Max (IIB) 0.007μA
Low-Offset NO
Frequency Compensation YES
Low-Bias YES
Micropower NO
Programmable Power NO
Nominal Gain Bandwidth Product 3MHz
Max I/O Voltage 1mV
Power YES
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Through Hole

TL288CP Overview


The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a J-FET-type. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. This electronic part is recommended for mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using an 2.6mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 100.42dB at all times. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 15V.

TL288CP Features


8 Pins
supply voltage of 15V
100.42dB voltage gain

TL288CP Applications


There are a lot of Texas Instruments TL288CP Instrumentational OP Amps applications.

  • Portable media players
  • Band-pass filter
  • Logarithmic operation circuits
  • High gain DC amplifier
  • Integrator circuits
  • Voltage regulation circuit
  • Power transmission
  • Switching amplifier
  • Power generator
  • Weighing systems

Write a review

Note: HTML is not translated!
    Bad           Good