TL28L92FR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 5A991.B |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | TL28L92 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 10mA |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 2.25mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TL28L92FR Overview
The package 44-QFP offers the best value.Transmission is carried out over 2, DUART channels.In terms of packaging, Tray is adopted.Its uPs/uCs/Peripheral ICs type is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In its configuration, 44 terminations are used.UART operates on 3.3V supply voltage.At present, this electronic part has a status of Active.There are 2 serial I/Os available for communication of data.Mounting is done through Surface Mount.With a supply voltage of 3.3V 5V, it operates.The electronic device is a type of integrated circuit with a pin count of 44.8MHz is the clock frequency of this integrated circuit.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.To maintain normal work for a long time, the operating temperature should not exceed -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.In its configuration, it is designed around the 44 pins.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter in it.Surface Mount is used for mounting it.Its high-efficiency operation relies on a voltage of 5V.Furthermore, it is also capable of IT ALSO OPERATE AT 5V SUPPLY.This part has a base part number of TL28L92.It reaches 10mA when the maximum supply current is acceptable.
TL28L92FR Features
2 serial I/Os
Clock frequency of 8MHz
Operating supply voltage of 5V
IT ALSO OPERATE AT 5V SUPPLY
TL28L92FR Applications
There are a lot of Texas Instruments TL28L92FR UARTs applications.
- Communications equipment
- Point-of- Sale Terminals
- Cellular Phones DataPort
- Portable Applications
- Portable and battery operated devices
- Multimedia Systems
- Handheld Terminals and Tablets
- Telecommunication Network Routers
- GPS Systems
- Wireless Infrared Data Communications Systems
