TL28L92IFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 5A991.B |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | TL28L92 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 10mA |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 2.25mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL28L92IFR Overview
UART is available in the cost-effective 44-QFP package.Transmission is done through 2, DUART channels.As for packaging, Tray is chosen.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.Configured with 44 terminations.For its operation, a voltage of 3.3V is provided as the supply voltage.At present, this electronic part has a status of Active.As a means of transferring data, there are 2 serial I/Os.Mounting is possible through Surface Mount.3.3V 5V supply voltage is required to operate it.The electronic device is a type of integrated circuit with a pin count of 44.There is a 8MHz clock frequency for this IC.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of -40°C.To maintain normal work for a long time, the operating temperature should not exceed 85°C.The configuration relies on the 44 pins.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter in it.The mount is done using Surface Mount.Its high-efficiency operation relies on a voltage of 5V.Additionally, it is capable of performing IT ALSO OPERATE AT 5V SUPPLY.Basically, it uses TL28L92 as its base part number.10mA is the maximum supply current that is acceptable.
TL28L92IFR Features
2 serial I/Os
Clock frequency of 8MHz
Operating supply voltage of 5V
IT ALSO OPERATE AT 5V SUPPLY
TL28L92IFR Applications
There are a lot of Texas Instruments TL28L92IFR UARTs applications.
- Point-of- Sale Terminals
- Cellular data devices
- Network Management
- Communications equipment
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Router C ontrol
- DTE for Modem Communication Systems
- Wireless Portable Point-of-Sale Terminals
- GPS Devices
- GPS Systems
