TL3016CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3016 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 10.6mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7800 ns |
| Common Mode Rejection Ratio | 97 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 97dB CMRR |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3016CD Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, Push-Pull, TTL output type for this comparator.This chip is designed with the Tube package.The comparator has 8 terminals.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Latch .A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .8 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TL3016 .This comparator presents a quiescent current of 12.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 10.6mA .Current supply exceeding 12.5mA could cause disfunction of the compartator.
TL3016CD Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 12.5mA
TL3016CD Applications
There are a lot of Texas Instruments TL3016CD linear comparators applications.
- Appliances
- Self-diagnostics
- Notebooks and PDAs
- Portable Battery Monitoring
- RC Timers
- Body Control Modules
- Zero-Crossing Detectors
- Metering Systems
- Handheld Instruments
- Factory automation & control
