Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
725mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TL3016 |
Pin Count |
8 |
Output Type |
Complementary, Push-Pull, TTL |
Number of Elements |
1 |
Nominal Supply Current |
10.6mA |
Power Dissipation |
725mW |
Output Current |
20mA |
Max Supply Current |
12.5mA |
Propagation Delay |
10 ns |
Quiescent Current |
12.5mA |
Response Time |
7800 ns |
Common Mode Rejection Ratio |
97 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Power Supply Rejection Ratio (PSRR) |
72dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
10μA |
Dual Supply Voltage |
5V |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-7V |
Voltage - Input Offset (Max) |
3mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
97dB CMRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL3016CDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, Push-Pull, TTL output type for this comparator.This chip is designed with the Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical with Latch .There are a total of 1 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.This comparator has 8 pins.In order to find a solution that meets your specific needs, search TL3016 for more pin-to-pin solutions.This comparator presents a quiescent current of 12.5mA .The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 10.6mA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 12.5mA .Input current to the device is limited to 10μA .Comparator electronics is acceptable to pack the device by TR .
TL3016CDR Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 12.5mA
TL3016CDR Applications
There are a lot of Texas Instruments TL3016CDR linear comparators applications.
- Mobile Phones
- Notebooks and PDAs
- Portable and Battery-Powered Systems
- Threshold Detectors
- Wide Range VCO; MOS Clock Timers
- Wireless Base Stations
- Analog front end
- Mobile Communications
- Appliances
- Laptop Computers