TL3016ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3016 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 10.6mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7800 ns |
| Common Mode Rejection Ratio | 97 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 97dB CMRR |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3016ID Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Complementary, Push-Pull, TTL output.This chip is designed with the Tube package.The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical with Latch comparator.The device contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TL3016 .As a result, this comparator displays a quiescent current of 12.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 10.6mA in order to use the device normally.A current supply greater than 12.5mA may result in the comparator malfunctioning.You are allowed to input a maximum current of 10μA into the device.
TL3016ID Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 12.5mA
TL3016ID Applications
There are a lot of Texas Instruments TL3016ID linear comparators applications.
- Infotainment & cluster
- Wireless Base Stations
- Mobile Phones
- General Purpose Low Voltage Applications
- Mobile Phones and Tablets
- Window Comparators
- Laptop Computers
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Security Detection Systems
