TL3016IPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 525mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL3016 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 12.5mA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 12.5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7800 ns |
| Common Mode Rejection Ratio | 97 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 97dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 97dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3016IPWRG4 Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a Complementary, Push-Pull, TTL output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Latch comparator.A total of 1 elements can be found in it.The pinout of the component starts from 8 pins it has.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search TL3016 for more pin-to-pin solutions.There is 12.5mA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 12.5mA .An excess of current supply over 12.5mA could result in malfunction of the comparator.A maximum current of 10μA can be supplied to the device.The device is acceptable to pack by TR .
TL3016IPWRG4 Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12.5mA
TL3016IPWRG4 Applications
There are a lot of Texas Instruments TL3016IPWRG4 linear comparators applications.
- Automatic Test Equipment
- Portable and Battery-Powered Systems
- Metering Systems
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- DC/DC and AC/DC power supplies
- Portable Battery Monitoring
- Infotainment and Clusters
