TL3116CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 14.7mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1.1μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 14.7mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3116CDR Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Complementary, Push-Pull, TTL is being used.Ready for shipping in Tape & Reel (TR) package.There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 1 elements.The device contains 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching TL3116 .A quiescent current of 14.7mA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 12.7mA .The compartator could be damaged if the current supply exceeds 12.7mA .The device can be operated with 5/+-5V power supplies.The device is packaged in TR and is often used in ADC circuits.
TL3116CDR Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 14.7mA
TL3116CDR Applications
There are a lot of Texas Instruments TL3116CDR linear comparators applications.
- Factory automation & control
- Building automation
- Consumer Medical Electronics
- Wearable Devices
- System control and monitoring
- DC/DC and AC/DC power supplies
- Threshold Detectors
- Ultra-Low Power Systems
- Notebooks and PDAs
- Power management
