TL3116CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 525mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 12.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 14.7mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1.1μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 14.7mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3116CPW Overview
To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of Complementary, Push-Pull, TTL .We ship the part through Tube .You can find 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .A total of 1 elements can be found in it.Electronic comparator has 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TL3116 .There is a quiescent current of 14.7mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 12.7mA when using the device.The compartator could be damaged if the current supply exceeds 12.7mA .5/+-5V power supplies are enough to run the device.
TL3116CPW Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 14.7mA
TL3116CPW Applications
There are a lot of Texas Instruments TL3116CPW linear comparators applications.
- Point of load regulators
- Mobile Communications
- Security Detection Systems
- High-Speed Differential Line Receiver
- Analog front end
- Threshold Detectors
- Mobile Phones
- Laptop Computers
- Consumer Medical Electronics
- Industrial
