TL3116CPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 525mW |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 525mW |
| Max Supply Current | 12.7mA |
| Current - Output | 20mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 14.7mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1.1μA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 2.5V |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TL3116CPWRG4 Overview
In order to facilitate transportation, it is packaged in TSSOP .A comparator with a TTL output is used here.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as General Purpose .A total of 8 pins are included.8 pins are present on the comparator.A quiescent current of 14.7mA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 12.7mA .If the current supply exceeds 12.7mA , the comparator could malfunction.Keeping the temperature below 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .10V is the maximum supply voltage of the comparator.Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 5V .In order to maintain the quality of the output, 1 channels cooperate together.This device's output current is rated at 20mA .
TL3116CPWRG4 Features
TTL output capability
General Purpose IC
Quiescent Current: 14.7mA
TL3116CPWRG4 Applications
There are a lot of Texas Instruments TL3116CPWRG4 linear comparators applications.
- RC Timers
- Motor drives
- DC/DC and AC/DC power supplies
- Security Detection Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
- Battery-Powered Electronics
- Mobile Phones and Tablets
- Hand-Held Electronics
- Limit Comparators
