TL3116ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 15mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1.1μA |
| Input Bias Current | 1.1μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 15mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3116ID Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Complementary, Push-Pull, TTL output is used here.Electronic comparator is shipped by Tube .You can find 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.This is a 1 element comparator.The device contains 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TL3116 .The comparator presents a quiescent current of 15mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 12.7mA supply current.An excess of current supply over 12.7mA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5/+-5V power supplies.You can input a maximum current of 1.1μA into this device.
TL3116ID Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
TL3116ID Applications
There are a lot of Texas Instruments TL3116ID linear comparators applications.
- System control and monitoring
- Self-diagnostics
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Power Supervision
- Automatic Test Equipment
- Battery-Powered Electronics
- Laptop Computers
- Power management
- Analog front end
