TL3116IDG4
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1.1μA |
| Input Bias Current | 1.1μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 15mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 15mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
TL3116IDG4 Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.This comparator is of the Complementary, Push-Pull, TTL output type.This chip is designed with the Tube package.The device is designed with 8 terminations.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .A total of 1 elements can be found in it.There are 8 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search TL3116 for more pin-to-pin solutions.A quiescent current of 15mA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 12.7mA .A current supply greater than 12.7mA may result in the comparator malfunctioning.A power supply of 5/+-5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 1.1μA current into the device.
TL3116IDG4 Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
TL3116IDG4 Applications
There are a lot of Texas Instruments TL3116IDG4 linear comparators applications.
- Wireless Base Stations
- Automatic Test Equipment
- Multivibrators and High-Voltage Digital Logic Gates
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
- Laptop Computers
- Infotainment and Clusters
- Portable and Battery-Powered Systems
- Body Control Modules
- Hand-Held Electronics
