TL3116IDR
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 12.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 15mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1.1μA |
| Input Bias Current | 700nA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 15mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
TL3116IDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Complementary, Push-Pull, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical General Purpose comparator.In total, it contains 1 elements.The device includes 8 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching TL3116 .There is 15mA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 12.7mA in order to use the device normally.An excess of current supply over 12.7mA could result in malfunction of the comparator.The device can be powered by 5/+-5V power supplies.The maximal current your can input into the device is 1.1μA .Comparator electronics is acceptable to pack the device by TR .
TL3116IDR Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
TL3116IDR Applications
There are a lot of Texas Instruments TL3116IDR linear comparators applications.
- Analog front end
- Infotainment & cluster
- Automatic Test Equipment
- Building automation
- Industrial
- Point of load regulators
- Limit Comparators
- Mobile Phones
- General Purpose Low Voltage Applications
- Self-diagnostics
