TL3116IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 525mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL3116 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 14.7mA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 14.7mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 15mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1.1μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 15mA |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 1.1μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3116IPWR Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.A comparator with a Complementary, Push-Pull, TTL output is used here.As a result, it is designed with Tape & Reel (TR) package.The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as General Purpose .Electronic comparator has a total of 1 elements.There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 8 pins.You may wish to search TL3116 for more solutions that address your specific needs.There is a quiescent current of 15mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 14.7mA .A current supply greater than 14.7mA may cause the comparator to malfunction.This device requires 5/+-5V power supplies to operate.With a TR package, this device is designed for general use (usually in ADC circuits).
TL3116IPWR Features
Complementary, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
TL3116IPWR Applications
There are a lot of Texas Instruments TL3116IPWR linear comparators applications.
- System control and monitoring
- Mobile Phones
- DC/DC and AC/DC power supplies
- Power Supervision
- Wireless Base Stations
- General-Purpose, Low-Voltage Applications
- Set Top Boxes
- Notebooks and PDAs
- Threshold Detectors
- Pulse, Squarewave, and Time Delay Generators
