TL331IDBVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL331 |
| Pin Count | 5 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 700μA |
| Output Current | 20mA |
| Max Supply Current | 700μA |
| Quiescent Current | 700μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL331IDBVRE4 Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.This device is designed in Tape & Reel (TR) case.There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.A comparator of this type is typically of type Differential .There are a total of 1 elements in it.Electronic comparator has 5 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 5 pins on the comparator.You can find more pin-to-pin solutions by searching TL331 .A quiescent current of 700μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 700μA when using the device.An excess of current supply over 700μA could result in malfunction of the comparator.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .With a TR package, this device is designed for general use (usually in ADC circuits).
TL331IDBVRE4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
Voltage Gain: 106.02dB
TL331IDBVRE4 Applications
There are a lot of Texas Instruments TL331IDBVRE4 linear comparators applications.
- Window Comparators
- Limit Comparators
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Infotainment & cluster
- Hand-Held Electronics
- Automotive
- General Purpose Low Voltage Applications
- Infotainment and Clusters
- Current and voltage sensing
