TL331KDBVT
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL331 |
| Pin Count | 5 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 700μA |
| Output Current | 20mA |
| Max Supply Current | 700μA |
| Quiescent Current | 700μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
TL331KDBVT Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.There is a CMOS, MOS, Open-Collector, TTL output type for this comparator.Ready for shipping in Tape & Reel (TR) package.The comparator has a total of 5 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as Differential .There are a total of 1 elements in it.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .The comparator has 5 pins.In order to find a solution that meets your specific needs, search TL331 for more pin-to-pin solutions.A quiescent current of 700μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 700μA .A current supply greater than 700μA may result in the comparator malfunctioning.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .With a TUBE package, this device is designed for general use (usually in ADC circuits).
TL331KDBVT Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 700μA
Voltage Gain: 106.02dB
TL331KDBVT Applications
There are a lot of Texas Instruments TL331KDBVT linear comparators applications.
- Analog front end
- RC Timers
- Hand-Held Electronics
- Ultra-Low Power Systems
- Window Comparators
- Mobile Communications
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
