Parameters |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TL3414 |
Pin Count |
8 |
Operating Supply Voltage |
7.5V |
Power Supplies |
+-1.5/+-7.5/3/15V |
Number of Channels |
2 |
Operating Supply Current |
4mA |
Nominal Supply Current |
6mA |
Slew Rate |
1.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
300nA |
Voltage - Supply, Single/Dual (±) |
3V~15V ±1.5V~7.5V |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
1.1MHz |
Gain Bandwidth Product |
2MHz |
Unity Gain BW-Nom |
1100 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.1μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
15V |
Voltage - Input Offset |
2mV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.6μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.1MHz |
Max I/O Voltage |
5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.1μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
TL3414AID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 5mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 4mA can be used to operate this linear amplifier. Maintain 100dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 7.5V.
TL3414AID Features
8 Pins
supply voltage of 5V
100dB voltage gain
TL3414AID Applications
There are a lot of Texas Instruments TL3414AID Instrumentational OP Amps applications.
- Blood pressure sensors
- Professional videography
- Mobile phone
- Exponential operation circuits
- Polarized electrodes
- Division circuits
- Industrial control system
- High gain DC amplifier
- Television
- Power transmission