TL3414AIDR
| Parameters | |
|---|---|
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TL3414 |
| Pin Count | 8 |
| Operating Supply Voltage | 7.5V |
| Number of Elements | 2 |
| Power Supplies | +-1.5/+-7.5/3/15V |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 6mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±1.5V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.1MHz |
| Gain Bandwidth Product | 2MHz |
| Unity Gain BW-Nom | 1100 kHz |
TL3414AIDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 4mA and 10 . Op amp is a member of the 100dB's 100dB family. This linear amplifier has a total of 2 elements. The operating supply voltage of the buffer op amp is rated at 7.5V. As a result of this, the buffer amplifier is packed in TR.
TL3414AIDR Features
8 Pins
supply voltage of 5V
100dB voltage gain
TL3414AIDR Applications
There are a lot of Texas Instruments TL3414AIDR Instrumentational OP Amps applications.
- Addition operation circuits
- Automation control systems
- Professional videography
- E-book readers
- Polarized electrodes
- Radar
- Exponential operation circuits
- Active probe
- High gain DC amplifier
- Automotive sensors
