TL343IDBVT
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TL343 |
| Pin Count | 5 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 2.8mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 20Hz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
TL343IDBVT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 5. Linear amplifier has a total of 5 pins. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 5 pins. Regarding input offset voltage, buffer amplifier rates 10mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. You can run this op amp ic on 700μA . Maintain 106.02dB as the voltage gain. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. The instrumentation amplifier is packed in the form of TR.
TL343IDBVT Features
5 Pins
supply voltage of 15V
106.02dB voltage gain
TL343IDBVT Applications
There are a lot of Texas Instruments TL343IDBVT Instrumentational OP Amps applications.
- Image computer boards
- Portable docking station
- Wireless base stations
- Weighing systems
- Medical instruments
- Logarithmic operation circuits
- Medical imaging
- Large motor controllers
- Professional videography
- Communication device
