TL3472CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL3472 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 9mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 500μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3472CP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 3.5mA, this op amp ic can operate. You should keep the voltage gain at 100dB for the time being. 2 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 18V.
TL3472CP Features
8 Pins
supply voltage of 15V
100dB voltage gain
TL3472CP Applications
There are a lot of Texas Instruments TL3472CP Instrumentational OP Amps applications.
- Integrator circuits
- High gain DC amplifier
- Precision measurement
- Power generator
- Signal filtering
- Weighing systems
- Large motor controllers
- ECG equipment
- Tablets
- Oscilloscopes
