TL3472ID
| Parameters | |
|---|---|
| Base Part Number | TL3472 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 9mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 500μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
TL3472ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 10mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using an 3.5mA supply current, this operational amplifier ics can be operated. 100dB should remain the voltage gain. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
TL3472ID Features
8 Pins
supply voltage of 15V
100dB voltage gain
TL3472ID Applications
There are a lot of Texas Instruments TL3472ID Instrumentational OP Amps applications.
- Portable media players
- Radar
- Weighing systems
- earphone
- Signal operation
- Differentiator circuits
- Weak signal detection
- Active probe
- Wireless base stations
- Multiplication circuits
