TL3474ACD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL3474 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 18mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3474ACD Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. A supply current of 3.5mA can be used to operate this linear amplifier. Op amp is a member of the 100dB's 100dB family. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 18V.
TL3474ACD Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474ACD Applications
There are a lot of Texas Instruments TL3474ACD Instrumentational OP Amps applications.
- Wireless base stations
- Displayers for aircraft and air transportation control systems
- Radar
- Large motor controllers
- Power control
- single/dual op amp sum and difference circuits
- Automatic control
- Commercial audio systems
- Mobile phone
- Switching amplifier
