TL3474AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL3474 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 18mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3474AIDR Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. Regarding input offset voltage, buffer amplifier rates 3mV voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 3.5mA , this buffer op amp will be able to operate. Voltage gain should remain at 100dB. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. The operating supply voltage of instrumentation amplifier is rated 18V voltage. An buffer amplifier is packed in a TR-shape according to the design.
TL3474AIDR Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474AIDR Applications
There are a lot of Texas Instruments TL3474AIDR Instrumentational OP Amps applications.
- Gaming industry
- Comparator
- Laptop
- Vehicle electronics
- Integrator circuits
- Wireless base stations
- Video computer boards
- Medical instruments
- Power transmission
- Weak signal detection
