Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~105°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
TL3474 |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Number of Elements |
4 |
Power Supplies |
5/+-15V |
Operating Supply Current |
3.5mA |
Nominal Supply Current |
18mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
100nA |
Voltage - Supply, Single/Dual (±) |
4V~36V ±2V~18V |
Output Current per Channel |
34mA |
Input Offset Voltage (Vos) |
3mV |
Bandwidth |
4MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.5μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.5μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
4MHz |
Max I/O Voltage |
3mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.075μA |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL3474AIPW Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 14 terminations over the past year. There are a total of 14 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.5mA and 10 . There should be no change in the voltage gain at 100dB. Op amp has total of 4 elements. The operating supply voltage of the buffer op amp is rated at 18V.
TL3474AIPW Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474AIPW Applications
There are a lot of Texas Instruments TL3474AIPW Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Multiplication circuits
- Fission chambers
- Wireless base stations
- Communication device
- Laptop
- Home audio systems
- Commercial audio systems
- Car stereo
- Proportional operation circuits