TL3474CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | TL3474 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/+-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 18mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3474CN Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . A supply current of 3.5mA can be used to operate this linear amplifier. Keeping the voltage gain at 100dB is the best course of action. There are 4 circuits on op amps. The operating supply voltage of the buffer op amp is rated at 18V.
TL3474CN Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474CN Applications
There are a lot of Texas Instruments TL3474CN Instrumentational OP Amps applications.
- Tablets
- Displayers for aircraft and air transportation control systems
- High-frequency data acquisition systems
- Automation control systems
- Television broadcasting equipment
- Communication
- Image computer boards
- Thermocouples
- Proportional counter tubes
- Fission chambers
