Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~105°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Base Part Number |
TL3474 |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Power Supplies |
5/+-15V |
Number of Channels |
4 |
Operating Supply Current |
3.5mA |
Nominal Supply Current |
18mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
100nA |
Voltage - Supply, Single/Dual (±) |
4V~36V ±2V~18V |
Output Current per Channel |
34mA |
Input Offset Voltage (Vos) |
10mV |
Bandwidth |
4MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.5μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
NO |
Max Frequency |
100kHz |
Bias Current-Max (IIB) @25C |
0.5μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
4MHz |
Max I/O Voltage |
10mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.075μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL3474ID Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. The pins on this board total to 14 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 14 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 10mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. The buffer amplifier is capable of operating from a supply current of 3.5mA . 100dB should be the voltage gain. The op amp ic has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 18V.
TL3474ID Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474ID Applications
There are a lot of Texas Instruments TL3474ID Instrumentational OP Amps applications.
- Test and measurement instruments
- Radar
- Car stereo
- ECG equipment
- Medical imaging
- Video computer boards
- Blood pressure sensors
- Digital cameras
- Thermocouples
- Precision measurement